全方位解读天美传媒的成功之道与未-全黄a免费一级毛片-全黄色毛片-全黄无码性色视在线观-全集bt电影天堂在-全球av集中精品导航福

2K SOLVENTBORNE FLUOROPOLYMER TOPCOAT - MULTICOLOR

PRODUCT DESCRIPTION & INTENDED USES

This is a two-component chemically curing fluoro-polymer coating. It has a semi-gloss finish with excellent gloss retention. To be used as a topcoat in atmospheric environments.

FEATURES & APPLICATION

• Excellent anti-corrosion performance, excellent weather resistance; 

• Excellent oil and water resistance; 

• Excellent impact resistance, wear resistance, good adhesion; 

• Good workability in application.

Widely used in

1. Steel structures, steel supports, and iron towers of transmission lines of various power equipment in substations;

2. Rust-prone cast iron or steel components such as buildings, bridges, ships, etc.;

3. Power plant cooling tower, desulfurization flue, main powerhouse, coal transport trestle, dry coal awning and other steel structures.

PRODUCT PICTURE

Front	Back

APPLICATION AREAS

Substations	Substations	Transmission line	Transmission line

RECOMMENDATION

• Recommended viscosity: Airless spray: 45″—55″ Air spray: 20±2″ Brush: 35″—45″

• Surface preparation: The substrate temperature must be above -10°C; Compatible with various primers and midcoats.

• Safety Precautions: The following measures shall be guaranteed during any paint applications: 1.Avoid skin and eye contact; 2.In case of skin or eye contact, flush with a large amount of water and immediately get medical attention; 3.Assure good ventilation; 4.Observe all health and safety regulations on-site.

TECHNICAL DATA SHEET