,,

Waterborne Acrylic Polyurethane Topcoat

2K WATERBORNE ACRYLIC POLYURETHANE TOPCOAT

PRODUCT DESCRIPTION

This is a high gloss durable finish based on waterborne polyurethane for steel surfaces of heavy-duty.

FEATURES & APPLICATION

High gloss, good weather resistance, and gloss retention;

Good workability;
Environment-friendly, no danger of fire.

Two-component weather-resistant waterborne acrylic polyurethane paint for bridge, storage tank, steel structure, and other heavy-duty facilities.

PRODUCT PICTURES


Front	Back

APPLICATION AREAS


Substations	Substations	Transmission line	Transmission line

APPLICATION GUIDANCE

Application Condition		The temperature is between 5℃~35℃ during application. The relative humidity of the air should not be greater than 70%. The metal surface temperature shall not be less than 3℃ above dew point.
Mixing		Combine Base with Hardener, mix thoroughly with power agitator.
Pot life		5℃	10℃	20℃	30℃
		5hrs	4hrs	3hrs	2hrs
Application methods		Recommended use airless spray, air spray: Nozzle tip: 0.33mm-0.43mm Nozzle pressure: ≥10MPa Brush, recommended for pre-coating and small areas, must be taken to achieve the specified dry film thickness. Roller can be used, care must be taken to achieve the specified dry film thickness.
Thinner		Water
Drying time	Temperature	5℃	10℃	20℃	30℃
	Surface dry	6hr	4hr	2hrs	60min
	Touch dry	12hrs	8hrs	4hrs	2hrs
	Min.interval	16hrs	12hrs	8hrs	4hrs
	Max.interval	7d	7d	7d	7d
	The given data is considered for reference only; the actual drying time will be changed generally related to air circulation, temperature, film thickness and the number of coats.
Drying condition		Air-drying, keep good ventilation in closed environment for normal drying.
Typical undercoat		SFXSX-04 Waterborne epoxy intermediate coat paint for transformers
Storage temperature		Transport should be maintained at 5~35℃ , water-bone coatings are not hazardous goods.
Shelf life		6 months minimum at 25℃ , subject to re-inspection thereafter.
Storage condition		Store in dry, cool conditions and storage temperature should be kept at 5~35℃ , away from sources of heat and ignition, containers must be kept tightly closed.

TECHNICAL DATA SHEET

No.	Items	Technical Data
1	Component	two-component

2	Color	Multi-colors
3	Gloss(60°)	High gloss
4	Mixing ratio	Base/Hardener=5/1(by weight)
5	Volume solids (mixed)	about 45%
6	Packing	A: 20kg/barrel; B: 4kg/barrel
7	Hardness	2H
8	Adhesion	1 level
9	Impact	50Kg · cm
10	Fineness	≤20um
11	Typical film thickness	Dry: 30-60 μm/coat; Wet: 67-133 μm/coat
12	Theoretical Coverage	0.13 Kg/m2/40μm Various depending on environment, applications, etc. Allow appropriate loss factors.
13	VOC	＜60g/L, accord with EU Directive2004/42/EC, subcategory j.
14	Complied standards	Complies with HG/T 4761-2014 and HJ 2537-2014.
15	Flash point	None